You are not logged in.
- Topics: Active | Unanswered
#1 2025-05-03 11:57:44
- cutecoder
- Member
- Registered: 2023-08-24
- Posts: 12
USB device only working with very specific pulseaudio setup
I have a front audio jack on my PC that works (but is crap). I also have a USB sound card that works partially. I want to get this USB sound card to work. I am setting up on a recently installed Archlinux system.
Past: I used pulseaudio with a very specific configuration that not only relies on .config/pulse but other things I can not reproduce. Removing .config/pulse/XXX-card-database.tbd causes the audible stream to stop working. This means I see the audio indicator in pavucontrol to go off but I can not hear the sound.
Now: I installed pipewire/wireplumber. It seems to be up and running as per systemctl. But the USB sound card is not working as expected (pavucontrol goes off but no hearable sound).
$ wpctl statusPipeWire 'pipewire-0' [1.4.2, steves@arch-tpg, cookie:2148713292]
└─ Clients:
32. WirePlumber [1.4.2, steves@arch-tpg, pid:629]
40. WirePlumber [export] [1.4.2, steves@arch-tpg, pid:629]
80. pipewire [1.4.2, steves@arch-tpg, pid:808]
81. Firefox [1.4.2, steves@arch-tpg, pid:858]
82. Firefox [1.4.2, steves@arch-tpg, pid:858]
84. Firefox [1.4.2, steves@arch-tpg, pid:858]
86. wpctl [1.4.2, steves@arch-tpg, pid:1600]
Audio
├─ Devices:
│ 41. Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] [alsa]
│ 42. Kraken Tournament Edition [alsa]
│ 43. SC450USB [alsa]
│ 44. HD Pro Webcam C920 [alsa]
│ 45. Built-in Audio [alsa]
│
├─ Sinks:
│ 52. Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] Digital Stereo (HDMI 6) [vol: 1.00]
│ * 55. Kraken Tournament Edition Chat [vol: 1.00]
│ 58. Built-in Audio Digital Stereo (IEC958) [vol: 1.00]
│
├─ Sources:
│ * 56. SC450USB Analog Stereo [vol: 1.00]
│ 57. HD Pro Webcam C920 Analog Stereo [vol: 1.00]
│ 59. Built-in Audio Analog Stereo [vol: 1.00]
│
├─ Filters:
│
└─ Streams:
Video
├─ Devices:
│ 53. HD Pro Webcam C920 [v4l2]
│ 54. HD Pro Webcam C920 [v4l2]
│
├─ Sinks:
│
├─ Sources:
│ * 78. HD Pro Webcam C920 (V4L2)
│
├─ Filters:
│
└─ Streams:
Settings
└─ Default Configured Devices:
0. Audio/Sink alsa_output.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00.stereo-chatThe default device seen is the USB device in question.
1. How can I get pipewire to work with this USB device on the new setup?
2. What could cause pulseaudio to work on this specific old setup?
I can freely switch between the setups by booting from either so that the specific root is selected.
Last edited by cutecoder (2025-05-03 12:56:52)
They said get Archlinux, it'll be fun they said... ZOMG I LOVE ARCH
Offline
#2 2025-05-03 13:01:20
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,355
Re: USB device only working with very specific pulseaudio setup
There's not much to say about how the device is setup. Generally speaking, if things are working on the ALSA layer you should be able to make them working with either.
So maybe post
sudo fuser -v /dev/snd/*
sudo dmesg | grep -E 'snd|usb'
aplay -lL
amixer -c0 #Or index from aplay -l of USB card
pactl list cards
pactl list sinkspotentially from both the working pulse and the not working pipewire setup
FWIW what we can glean from wpctl, you likely have the wrong profile configured and your USB sound card is not exposing an output, but only a source, this might be as simple as selecting the correct card profile.
Offline
#3 2025-05-03 13:44:30
- cutecoder
- Member
- Registered: 2023-08-24
- Posts: 12
Re: USB device only working with very specific pulseaudio setup
New setup:
sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: steves F.... wireplumber
/dev/snd/controlC1: steves F.... wireplumber
/dev/snd/controlC2: steves F.... wireplumber
/dev/snd/controlC3: steves F.... wireplumber
/dev/snd/controlC4: steves F.... wireplumber
/dev/snd/seq: steves F.... pipewiresudo dmesg | grep -E 'snd|usb'
[ 0.221682] usbcore: registered new interface driver usbfs
[ 0.221682] usbcore: registered new interface driver hub
[ 0.221682] usbcore: registered new device driver usb
[ 0.263351] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x770 took 15413 usecs
[ 0.279347] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x770 took 15606 usecs
[ 0.328012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.328014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.328016] usb usb1: Product: xHCI Host Controller
[ 0.328017] usb usb1: Manufacturer: Linux 6.14.4-arch1-2 xhci-hcd
[ 0.328018] usb usb1: SerialNumber: 0000:00:14.0
[ 0.328621] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 0.328624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.328625] usb usb3: Product: xHCI Host Controller
[ 0.328626] usb usb3: Manufacturer: Linux 6.14.4-arch1-2 xhci-hcd
[ 0.328627] usb usb3: SerialNumber: 0000:00:14.0
[ 0.337361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.337363] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.337364] usb usb2: Product: EHCI Host Controller
[ 0.337366] usb usb2: Manufacturer: Linux 6.14.4-arch1-2 ehci_hcd
[ 0.337367] usb usb2: SerialNumber: 0000:00:1a.0
[ 0.347350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.347352] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.347353] usb usb4: Product: EHCI Host Controller
[ 0.347354] usb usb4: Manufacturer: Linux 6.14.4-arch1-2 ehci_hcd
[ 0.347355] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.408229] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.408231] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.408232] usb usb5: Product: xHCI Host Controller
[ 0.408233] usb usb5: Manufacturer: Linux 6.14.4-arch1-2 xhci-hcd
[ 0.408234] usb usb5: SerialNumber: 0000:03:00.0
[ 0.408383] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.408397] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 0.408399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.408400] usb usb6: Product: xHCI Host Controller
[ 0.408401] usb usb6: Manufacturer: Linux 6.14.4-arch1-2 xhci-hcd
[ 0.408402] usb usb6: SerialNumber: 0000:03:00.0
[ 0.408582] usbcore: registered new interface driver usbserial_generic
[ 0.408586] usbserial: USB Serial support registered for generic
[ 0.567359] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 0.575357] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.583395] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.691644] usb 1-1: New USB device found, idVendor=1532, idProduct=0084, bcdDevice= 2.00
[ 0.691647] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.691649] usb 1-1: Product: Razer DeathAdder V2
[ 0.691650] usb 1-1: Manufacturer: Razer
[ 0.701719] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 0.701727] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.709685] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 0.709688] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.805300] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[ 0.931423] usb 1-3: New USB device found, idVendor=1346, idProduct=0002, bcdDevice= 0.01
[ 0.931427] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.931429] usb 1-3: Product: SC450USB
[ 0.931430] usb 1-3: Manufacturer: Thomann
[ 1.043306] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 1.167512] usb 1-4: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 1.04
[ 1.167517] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.167518] usb 1-4: Product: Keychron K2
[ 1.167519] usb 1-4: Manufacturer: Keychron
[ 1.193983] usbcore: registered new interface driver usbhid
[ 1.193986] usbhid: USB HID core driver
[ 1.281340] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 1.420048] usb 1-7: New USB device found, idVendor=05e3, idProduct=0745, bcdDevice= 9.03
[ 1.420051] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1.420052] usb 1-7: Product: USB Storage
[ 1.420053] usb 1-7: SerialNumber: 000000000903
[ 1.534424] usb 1-9: new high-speed USB device number 6 using xhci_hcd
[ 3.614655] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 3.614799] input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0084.0001/input/input2
[ 3.615049] hid-generic 0003:1532:0084.0001: input,hidraw0: USB HID v1.00 Mouse [Razer Razer DeathAdder V2] on usb-0000:00:14.0-1/input0
[ 3.615457] input: Razer Razer DeathAdder V2 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0084.0002/input/input3
[ 3.615941] scsi host6: usb-storage 1-7:1.0
[ 3.616048] usbcore: registered new interface driver usb-storage
[ 3.619984] usbcore: registered new interface driver uas
[ 3.667468] input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0084.0002/input/input4
[ 3.667622] hid-generic 0003:1532:0084.0002: input,hidraw1: USB HID v1.00 Keyboard [Razer Razer DeathAdder V2] on usb-0000:00:14.0-1/input1
[ 3.667824] input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0084.0003/input/input5
[ 3.739568] hid-generic 0003:1532:0084.0003: input,hidraw2: USB HID v1.00 Keyboard [Razer Razer DeathAdder V2] on usb-0000:00:14.0-1/input2
[ 3.739945] hid-generic 0003:1532:0084.0004: hiddev96,hidraw3: USB HID v1.11 Device [Razer Razer DeathAdder V2] on usb-0000:00:14.0-1/input3
[ 3.744016] input: Keychron Keychron K2 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:05AC:024F.0005/input/input6
[ 3.791547] apple 0003:05AC:024F.0005: input,hidraw4: USB HID v1.11 Keyboard [Keychron Keychron K2] on usb-0000:00:14.0-4/input0
[ 3.791812] input: Keychron Keychron K2 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:05AC:024F.0006/input/input7
[ 3.792085] apple 0003:05AC:024F.0006: input,hiddev97,hidraw5: USB HID v1.11 Keyboard [Keychron Keychron K2] on usb-0000:00:14.0-4/input1
[ 3.889925] usb 1-9: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[ 3.889928] usb 1-9: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[ 3.889929] usb 1-9: Product: HD Pro Webcam C920
[ 3.889931] usb 1-9: SerialNumber: B86926BF
[ 4.002334] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 4.430628] usb 1-10: New USB device found, idVendor=1532, idProduct=0520, bcdDevice= 0.88
[ 4.430631] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.430633] usb 1-10: Product: Razer Kraken Tournament Edition
[ 4.430634] usb 1-10: Manufacturer: Razer
[ 4.430635] usb 1-10: SerialNumber: 000000000000000000000000
[ 4.562674] input: Razer Razer Kraken Tournament Edition Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.5/0003:1532:0520.0007/input/input8
[ 4.613436] input: Razer Razer Kraken Tournament Edition as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.5/0003:1532:0520.0007/input/input9
[ 4.615030] hid-generic 0003:1532:0520.0007: input,hiddev98,hidraw6: USB HID v1.11 Device [Razer Razer Kraken Tournament Edition ] on usb-0000:00:14.0-10/input5
[ 6.307754] usbcore: registered new device driver apple-mfi-fastcharge
[ 6.530138] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.530443] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 6.544125] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.570324] usb 1-9: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[ 6.573673] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 6.574132] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 6.574136] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.574138] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.574139] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.574141] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 6.574142] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.574143] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.574145] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.574146] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.577103] usbcore: registered new interface driver uvcvideo
[ 6.861614] usb 1-10: 1:1: cannot get freq at ep 0x81
[ 6.863593] usb 1-10: 2:1: cannot get freq at ep 0x1
[ 6.868770] usb 1-10: 4:1: cannot get freq at ep 0x2
[ 6.873517] usbcore: registered new interface driver snd-usb-audio
[ 10.520386] usb 1-9: reset high-speed USB device number 6 using xhci_hcdaplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, ALC1150 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
Front output / input
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Digital
IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA ATI HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA ATI HDMI, HDMI 2
HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 3
HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
HDA ATI HDMI, HDMI 4
HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
HDA ATI HDMI, ASUS VS247
HDMI Audio Output
usbstream:CARD=HDMI
HDA ATI HDMI
USB Stream Output
usbstream:CARD=SC450USB
SC450USB
USB Stream Output
usbstream:CARD=C920
HD Pro Webcam C920
USB Stream Output
sysdefault:CARD=Edition
Razer Kraken Tournament Edition, USB Audio
Default Audio Device
front:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
Front output / input
surround21:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Edition,DEV=0
Razer Kraken Tournament Edition, USB Audio
IEC958 (S/PDIF) Digital Audio Output
iec958:CARD=Edition,DEV=1
Razer Kraken Tournament Edition, USB Audio #1
IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Edition
Razer Kraken Tournament Edition
USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [ASUS VS247]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 4: Edition [Razer Kraken Tournament Edition], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 4: Edition [Razer Kraken Tournament Edition], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0amixer -c4
Simple mixer control 'PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'PCM',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Auto Gain Control',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Headset',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 35
Front Left: Capture 31 [89%] [1.00dB] [on]
Front Right: Capture 31 [89%] [1.00dB] [on]pactl list cards
Card #41
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HDA ATI HDMI at 0xf7e60000 irq 37"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.description = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "6545091"
device.product.id = "0xaac8"
device.product.name = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
media.class = "Audio/Device"
spa.object.id = "4"
factory.id = "15"
client.id = "40"
object.id = "41"
object.serial = "41"
object.path = "alsa:acp:HDMI"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf7e60000 irq 37"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100500"
alsa.id = "HDMI"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 6, sources: 0, priority: 1, available: yes)
Active Profile: output:hdmi-stereo-extra5
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
proxyLoc(card.profile).port = "0"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
proxyLoc(card.profile).port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
proxyLoc(card.profile).port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
proxyLoc(card.profile).port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 5"
device.icon_name = "video-display"
proxyLoc(card.profile).port = "4"
Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 6"
device.icon_name = "video-display"
proxyLoc(card.profile).port = "5"
device.product.name = "ASUS VS247"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo-extra5
Card #42
Name: alsa_card.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "4"
api.alsa.card.longname = "Razer Razer Kraken Tournament Edition at usb-0000:00:14.0-10, full speed"
api.alsa.card.name = "Razer Kraken Tournament Edition"
api.alsa.path = "hw:4"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio4"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "usb"
device.bus-id = "usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00"
device.bus_path = "pci-0000:00:14.0-usb-0:10:1.0"
device.description = "Kraken Tournament Edition"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-usb"
device.name = "alsa_card.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00"
device.nick = "Razer Kraken Tournament Edition"
device.plugged.usec = "6870987"
device.product.id = "0x0520"
device.product.name = "Kraken Tournament Edition"
device.profile-set = "usb-gaming-headset.conf"
device.serial = "Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/sound/card4"
device.vendor.id = "0x1532"
device.vendor.name = "Razer USA, Ltd"
media.class = "Audio/Device"
spa.object.id = "10"
factory.id = "15"
client.id = "40"
object.id = "42"
object.serial = "42"
object.path = "alsa:acp:Edition"
alsa.card = "4"
alsa.card_name = "Razer Kraken Tournament Edition"
alsa.long_card_name = "Razer Razer Kraken Tournament Edition at usb-0000:00:14.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB1532:0520"
alsa.id = "Edition"
device.string = "4"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:stereo-chat+input:stereo-chat: Chat Output + Chat Input (sinks: 1, sources: 1, priority: 5050, available: yes)
output:stereo-game+input:stereo-chat: Game Output + Chat Input (sinks: 1, sources: 1, priority: 5050, available: yes)
output:stereo-chat: Chat Output (sinks: 1, sources: 0, priority: 5000, available: yes)
output:stereo-game: Game Output (sinks: 1, sources: 0, priority: 5000, available: yes)
input:stereo-chat: Chat Input (sinks: 0, sources: 1, priority: 50, available: yes)
pro-audio: Pro Audio (sinks: 2, sources: 1, priority: 1, available: yes)
Active Profile: output:stereo-chat
Ports:
usb-gaming-headset-input: Headset Microphone (type: Headset, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "headset"
proxyLoc(card.profile).port = "0"
Part of profile(s): input:stereo-chat, output:stereo-chat+input:stereo-chat, output:stereo-game+input:stereo-chat
usb-gaming-headset-output-stereo: Headphones (type: Headphones, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "headphones"
proxyLoc(card.profile).port = "1"
Part of profile(s): output:stereo-chat, output:stereo-chat+input:stereo-chat, output:stereo-game, output:stereo-game+input:stereo-chat
Card #43
Name: alsa_card.usb-Thomann_SC450USB-00
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.card.longname = "Thomann SC450USB at usb-0000:00:14.0-3, full speed"
api.alsa.card.name = "SC450USB"
api.alsa.path = "hw:2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "usb"
device.bus-id = "usb-Thomann_SC450USB-00"
device.bus_path = "pci-0000:00:14.0-usb-0:3:1.0"
device.description = "SC450USB "
device.enum.api = "udev"
device.icon_name = "audio-card-analog-usb"
device.name = "alsa_card.usb-Thomann_SC450USB-00"
device.nick = "SC450USB"
device.plugged.usec = "6594815"
device.product.id = "0x0002"
device.product.name = "SC450USB "
device.serial = "Thomann_SC450USB"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/sound/card2"
device.vendor.id = "0x1346"
device.vendor.name = "Thomann "
media.class = "Audio/Device"
spa.object.id = "6"
factory.id = "15"
client.id = "40"
object.id = "43"
object.serial = "43"
object.path = "alsa:acp:SC450USB"
alsa.card = "2"
alsa.card_name = "SC450USB"
alsa.long_card_name = "Thomann SC450USB at usb-0000:00:14.0-3, full speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB1346:0002"
alsa.id = "SC450USB"
device.string = "2"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
port.type = "mic"
device.icon_name = "audio-input-microphone"
proxyLoc(card.profile).port = "0"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
proxyLoc(card.profile).port = "1"
Part of profile(s): input:iec958-stereo
Card #44
Name: alsa_card.usb-046d_HD_Pro_Webcam_C920_B86926BF-02
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "3"
api.alsa.card.longname = "HD Pro Webcam C920 at usb-0000:00:14.0-9, high speed"
api.alsa.card.name = "HD Pro Webcam C920"
api.alsa.path = "hw:3"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio3"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "usb"
device.bus-id = "usb-046d_HD_Pro_Webcam_C920_B86926BF-02"
device.bus_path = "pci-0000:00:14.0-usb-0:9:1.2"
device.description = "HD Pro Webcam C920"
device.enum.api = "udev"
device.form_factor = "webcam"
device.icon_name = "camera-web-analog-usb"
device.name = "alsa_card.usb-046d_HD_Pro_Webcam_C920_B86926BF-02"
device.nick = "HD Pro Webcam C920"
device.plugged.usec = "6813114"
device.product.id = "0x082d"
device.product.name = "HD Pro Webcam C920"
device.serial = "046d_HD_Pro_Webcam_C920_B86926BF"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/sound/card3"
device.vendor.id = "0x046d"
device.vendor.name = "Logitech, Inc."
media.class = "Audio/Device"
spa.object.id = "8"
factory.id = "15"
client.id = "40"
object.id = "44"
object.serial = "44"
object.path = "alsa:acp:C920"
alsa.card = "3"
alsa.card_name = "HD Pro Webcam C920"
alsa.long_card_name = "HD Pro Webcam C920 at usb-0000:00:14.0-9, high speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:082d"
alsa.id = "C920"
device.string = "3"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
port.type = "mic"
device.icon_name = "audio-input-microphone"
proxyLoc(card.profile).port = "0"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
proxyLoc(card.profile).port = "1"
Part of profile(s): input:iec958-stereo
Card #45
Name: alsa_card.pci-0000_00_1b.0
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA Intel PCH at 0xf7f30000 irq 38"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "hw:0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:1b.0"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1b.0"
device.nick = "HDA Intel PCH"
device.plugged.usec = "6592945"
device.product.id = "0x8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
media.class = "Audio/Device"
spa.object.id = "2"
factory.id = "15"
client.id = "40"
object.id = "45"
object.serial = "45"
object.path = "alsa:acp:PCH"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7f30000 irq 38"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Realtek ALC1150"
alsa.components = "HDA:10ec0900,10438657,00100001"
alsa.id = "PCH"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
Active Profile: output:iec958-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
proxyLoc(card.profile).port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
proxyLoc(card.profile).port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
proxyLoc(card.profile).port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
proxyLoc(card.profile).port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
proxyLoc(card.profile).port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
proxyLoc(card.profile).port = "5"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereopactl list sinks
Sink #52
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra5
Description: Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] Digital Stereo (HDMI 6)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra5.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.class = "generic"
alsa.components = "HDA:1002aa01,00aa0100,00100500"
alsa.device = "11"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 5"
alsa.long_card_name = "HDA ATI HDMI at 0xf7e60000 irq 37"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.name = "ASUS VS247"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA ATI HDMI at 0xf7e60000 irq 37"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hdmi:1,5"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "21"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "41"
device.profile.description = "Digital Stereo (HDMI 6)"
device.profile.name = "hdmi-stereo-extra5"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
iec958.codecs = "[\"PCM\"]"
media.class = "Audio/Sink"
device.description = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo-extra5"
node.nick = "ASUS VS247"
node.pause-on-idle = "false"
object.path = "alsa:acp:HDMI:21:playback"
port.group = "playback"
priority.driver = "568"
priority.session = "568"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "52"
object.serial = "52"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "6545091"
device.product.id = "0xaac8"
device.product.name = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
spa.object.id = "4"
device.string = "1"
Ports:
hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, availability group: Legacy 6, available)
Active Port: hdmi-output-5
Formats:
pcm
Sink #55
State: SUSPENDED
Name: alsa_output.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00.stereo-chat
Description: Kraken Tournament Edition Chat
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00.stereo-chat.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "4"
alsa.card_name = "Razer Kraken Tournament Edition"
alsa.class = "generic"
alsa.components = "USB1532:0520"
alsa.device = "0"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "Razer Razer Kraken Tournament Edition at usb-0000:00:14.0-10, full speed"
alsa.mixer_name = "USB Mixer"
alsa.name = "USB Audio"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "Razer Razer Kraken Tournament Edition at usb-0000:00:14.0-10, full speed"
api.alsa.card.name = "Razer Kraken Tournament Edition"
api.alsa.path = "hw:4,0,0"
api.alsa.pcm.card = "4"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "42"
device.intended_roles = "phone"
device.profile.description = "Chat"
device.profile.name = "stereo-chat"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Kraken Tournament Edition"
node.name = "alsa_output.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00.stereo-chat"
node.nick = "Razer Kraken Tournament Edition"
node.pause-on-idle = "false"
object.path = "alsa:acp:Edition:4:playback"
port.group = "playback"
priority.driver = "1000"
priority.session = "1000"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "55"
object.serial = "55"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "4"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio4"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "usb"
device.bus-id = "usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00"
device.bus_path = "pci-0000:00:14.0-usb-0:10:1.0"
device.enum.api = "udev"
device.name = "alsa_card.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00"
device.nick = "Razer Kraken Tournament Edition"
device.plugged.usec = "6870987"
device.product.id = "0x0520"
device.product.name = "Kraken Tournament Edition"
device.profile-set = "usb-gaming-headset.conf"
device.serial = "Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/sound/card4"
device.vendor.id = "0x1532"
device.vendor.name = "Razer USA, Ltd"
spa.object.id = "10"
device.string = "4"
Ports:
usb-gaming-headset-output-stereo: Headphones (type: Headphones, priority: 0, availability unknown)
Active Port: usb-gaming-headset-output-stereo
Formats:
pcm
Sink #58
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.iec958-stereo
Description: Built-in Audio Digital Stereo (IEC958)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.iec958-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.components = "HDA:10ec0900,10438657,00100001"
alsa.device = "1"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC1150 Digital"
alsa.long_card_name = "HDA Intel PCH at 0xf7f30000 irq 38"
alsa.mixer_name = "Realtek ALC1150"
alsa.name = "ALC1150 Digital"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA Intel PCH at 0xf7f30000 irq 38"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "iec958:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "11"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "45"
device.profile.description = "Digital Stereo (IEC958)"
device.profile.name = "iec958-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio"
node.name = "alsa_output.pci-0000_00_1b.0.iec958-stereo"
node.nick = "ALC1150 Digital"
node.pause-on-idle = "false"
object.path = "alsa:acp:PCH:11:playback"
port.group = "playback"
priority.driver = "736"
priority.session = "736"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "58"
object.serial = "58"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1b.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.name = "alsa_card.pci-0000_00_1b.0"
device.nick = "HDA Intel PCH"
device.plugged.usec = "6592945"
device.product.id = "0x8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
Active Port: iec958-stereo-output
Formats:
pcmOld setup changes:
(diff) sudo fuser -v /dev/snd/*
2,7c2,6
< /dev/snd/controlC0: steves F.... wireplumber
< /dev/snd/controlC1: steves F.... wireplumber
< /dev/snd/controlC2: steves F.... wireplumber
< /dev/snd/controlC3: steves F.... wireplumber
< /dev/snd/controlC4: steves F.... wireplumber
< /dev/snd/seq: steves F.... pipewire
---
> /dev/snd/controlC0: steves 5383 F.... pulseaudio
> /dev/snd/controlC1: steves 5383 F.... pulseaudio
> /dev/snd/controlC2: steves 5383 F.... pulseaudio
> /dev/snd/controlC3: steves 5383 F.... pulseaudio
> /dev/snd/controlC4: steves 5383 F.... pulseaudio(diff) sudo dmesg | grep -E 'snd|usb'
116a117,119
> usb 1-10: 1:1: usb_set_interface failed (-71)
> usb 1-10: 1:1: usb_set_interface failed (-71)
> usb 1-10: 1:1: usb_set_interface failed (-71)(diff) aplay -lL
13,14d12
< pipewire
< PipeWire Sound Server(diff) amixer -c4
(Empty diff)pactl list cards
Card #0
Name: alsa_card.pci-0000_01_00.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf7e60000 irq 37"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aac8"
device.product.name = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
device.string = "1"
device.description = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 38468, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo-extra5
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, available)
Properties:
device.icon_name = "video-display"
device.product.name = "ASUS VS247"
Part of profile(s): output:hdmi-stereo-extra5
Card #1
Name: alsa_card.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "4"
alsa.card_name = "Razer Kraken Tournament Edition"
alsa.long_card_name = "Razer Razer Kraken Tournament Edition at usb-0000:00:14.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:10:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/sound/card4"
udev.id = "usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00"
device.bus = "usb"
device.vendor.id = "1532"
device.vendor.name = "Razer USA, Ltd"
device.product.id = "0520"
device.product.name = "Kraken Tournament Edition"
device.serial = "Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000"
device.string = "4"
device.description = "Kraken Tournament Edition"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:stereo-chat: Chat Input (sinks: 0, sources: 1, priority: 50, available: yes)
output:stereo-chat: Chat Output (sinks: 1, sources: 0, priority: 5000, available: yes)
output:stereo-chat+input:stereo-chat: Chat Output + Chat Input (sinks: 1, sources: 1, priority: 5050, available: yes)
output:stereo-game: Game Output (sinks: 1, sources: 0, priority: 5000, available: yes)
output:stereo-game+input:stereo-chat: Game Output + Chat Input (sinks: 1, sources: 1, priority: 5050, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:stereo-game
Ports:
usb-gaming-headset-input: Headset Microphone (type: Headset, priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): input:stereo-chat, output:stereo-chat+input:stereo-chat, output:stereo-game+input:stereo-chat
usb-gaming-headset-output-stereo: Headphones (type: Headphones, priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): output:stereo-chat, output:stereo-chat+input:stereo-chat, output:stereo-game, output:stereo-game+input:stereo-chat
Card #2
Name: alsa_card.usb-Thomann_SC450USB-00
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "2"
alsa.card_name = "SC450USB"
alsa.long_card_name = "Thomann SC450USB at usb-0000:00:14.0-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:3:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/sound/card2"
udev.id = "usb-Thomann_SC450USB-00"
device.bus = "usb"
device.vendor.id = "1346"
device.vendor.name = "Thomann "
device.product.id = "0002"
device.product.name = "SC450USB "
device.serial = "Thomann_SC450USB"
device.string = "2"
device.description = "SC450USB "
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): input:iec958-stereo
Card #3
Name: alsa_card.usb-046d_HD_Pro_Webcam_C920_B86926BF-02
Driver: module-alsa-card.c
Owner Module: 9
Properties:
alsa.card = "3"
alsa.card_name = "HD Pro Webcam C920"
alsa.long_card_name = "HD Pro Webcam C920 at usb-0000:00:14.0-9, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:9:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/sound/card3"
udev.id = "usb-046d_HD_Pro_Webcam_C920_B86926BF-02"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "082d"
device.product.name = "HD Pro Webcam C920"
device.serial = "046d_HD_Pro_Webcam_C920_B86926BF"
device.form_factor = "webcam"
device.string = "3"
device.description = "HD Pro Webcam C920"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): input:iec958-stereo
Card #4
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 10
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7f30000 irq 38"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 38268, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:iec958-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereopactl list sinks
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra5
Description: Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] Digital Stereo (HDMI 6)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra5.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ASUS VS247"
alsa.id = "HDMI 5"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "11"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf7e60000 irq 37"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aac8"
device.product.name = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]"
device.string = "hdmi:1,5"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra5"
device.profile.description = "Digital Stereo (HDMI 6)"
device.description = "Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] Digital Stereo (HDMI 6)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, available)
Active Port: hdmi-output-5
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00.stereo-game
Description: Kraken Tournament Edition Game
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00.stereo-game.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio #1"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "4"
alsa.card_name = "Razer Kraken Tournament Edition"
alsa.long_card_name = "Razer Razer Kraken Tournament Edition at usb-0000:00:14.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:10:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/sound/card4"
udev.id = "usb-Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000-00"
device.bus = "usb"
device.vendor.id = "1532"
device.vendor.name = "Razer USA, Ltd"
device.product.id = "0520"
device.product.name = "Kraken Tournament Edition"
device.serial = "Razer_Razer_Kraken_Tournament_Edition_000000000000000000000000"
device.string = "hw:4,1,0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "stereo-game"
device.profile.description = "Game"
device.description = "Kraken Tournament Edition Game"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
usb-gaming-headset-output-stereo: Headphones (type: Headphones, priority: 0, availability unknown)
Active Port: usb-gaming-headset-output-stereo
Formats:
pcm
Sink #2
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.iec958-stereo
Description: Built-in Audio Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 10
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.iec958-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC1150 Digital"
alsa.id = "ALC1150 Digital"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7f30000 irq 38"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "iec958:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
device.description = "Built-in Audio Digital Stereo (IEC958)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
Active Port: iec958-stereo-output
Formats:
pcmLast edited by cutecoder (2025-05-03 13:54:14)
They said get Archlinux, it'll be fun they said... ZOMG I LOVE ARCH
Offline